Views:7 Author:Site Editor Publish Time: 2021-01-20 Origin:Site
As one of the core components of the equipment, the guide rail and linear axis are used for guiding and supporting. In order to ensure the high processing accuracy of the machine, the guide rail and linear axis are required to have high guiding accuracy and good motion stability.
During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece. These smoke and dust will be deposited on the surface of the guide rail and linear axis for a long time, which has a great impact on the processing accuracy of the equipment. Corrosion points are formed on the surface of the linear shaft and guide rail, which shortens the service life of the equipment.
In order to make the machine work normally and stably and to ensure the processing quality of the products, the daily maintenance of the guide rail and linear axis must be done carefully.
Note: Please prepare dry cotton cloth and lubricant to clean the guide rail. The guide rail of the engraving machine is divided into linear guide rail and roller guide rail.
Cleaning of linear guideway: First move the laser head to the far right (or left), find the linear guide, wipe it with a dry cotton cloth until it is bright and dust-free, add a little lubricating oil (sewing machine oil can be used, do not use machine oil), slowly push the laser head from left to right several times to distribute the lubricant evenly.
Cleaning the roller guideway: Move the beam to the inside, open the end covers on both sides of the machine, find the guide rails, wipe clean the areas where the guide rails on both sides are in contact with the rollers with a dry cotton cloth, and then move the beam to clean the rest.
In addition to the good configuration of the linear module, it also relies on the correct installation method to maintain the best product characteristics and prevent redundant after-sales service. What problems are more likely to occur when the linear module is installed? The editor of Screw TechnoRead More