What are the advantages of the rubber tension meter Ball Screw? The ball screw plays an important role in the tension machine. We must not ignore it. So what are the important roles and principles? Now, follow Haida engineers to do the following:
First, principle:
1 ) It is a product that converts rotary motion into Linear Motion and is also the ideal product for converting linear motion into rotary motion. It is generally composed of a screw, a nut and a ball.
2 ) Turning the rotary motion into a linear motion also promotes the movement of the Bearing from rolling to sliding, and has a small frictional resistance. The ball screw is widely used in various industries.
3 ) The longest is used for the machine tool and precision Machinery. Its function is that the rotary motion becomes a linear motion, and converting torque into an axial reverse force requires high spirit, reversibility, and high efficiency.
Second, characteristics:
1 ) The torque of the ball screw and the sliding screw is 1/3 : There are many balls between the screw shaft of the ball screw and the screw nut, so the movement efficiency is relatively high. The previous sliding screw and the drive Torque is below 1/3 , very power saving.
2 ) High-precision: It is manufactured in Japan. In the research, assembly, inspection and other environmental aspects, it will have strict control of temperature and humidity, and a relatively complete quality management system has been fully guaranteed.
3 ) No side seam, high performance: Preload can be added because the pre-pressure can make the gap reach a negative value, which promotes a relatively high rigidity.
4 ) High-speed feed: High-efficiency and low heat, so high-speed feed motion can be achieved.
5 ) High-speed feeding possible: high movement efficiency and low heat generation, so high-speed feed movement can be achieved.
What are the advantages of the rubber tension meter ball screw? The above is the characteristics of the rubber tension meter ball screw, if you still do not understand the place, please call Haida equipment, our company (Hai Da) production of tensile machines are using ball screw.
Article Source: Dongguan Haida International Instrument is not allowed to reprint without permission! (Or: if you need to reprint, indicate the source)